xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
38
SNTP Settings
The Simple Network Time Protocol (SNTP) is a protocol for synchronizing computer clocks through the Internet. It
provides comprehensive mechanisms to access national time and frequency dissemination services, organize the
SNTP subnet of servers and clients, and adjust the system clock in each participant.
Time Settings
To configure the time settings for the Switch, click
Configuration > SNTP Settings > Time Settings
Figure 2 - 31 Time Settings window
The following parameters can be set or are displayed:
Parameter Description
Status
SNTP State
Use the radius button to select an
Enabled
or
Disabled
SNTP state.
Current Time
Displays the Current Time set on the Switch.
Time Source
Displays the time source for the system.
SNTP Settings
SNTP First Server
This is the IP address of the primary server the SNTP information will be taken from.
SNTP Second Server
This is the IP address of the secondary server the SNTP information will be taken from.
SNTP Po ll I nterval i n
Seconds (30-99999)
This is the interval, in seconds, between requests for updated SNTP information.
Set Current Time
Date (DD/MM/YYYY)
Enter the current date in day, month and year to update the system clock.
Time in (HH:MM:SS)
Enter the current time in hours, minutes, and seconds.
Click
Apply
to implement changes made.
Summary of Contents for DES-3528 - xStack Switch - Stackable
Page 19: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 18...
Page 214: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 213...
Page 306: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 305...
