xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
89
RSPAN Settings
This table controls the RSPAN function. The purpose of the RSPAN function is to mirror the packets to a remote
switch. The packet travels from the switch where the monitored packet is received, through the intermediate switch,
then to the switch where the sniffer is attached. The first switch is also named the source switch. RSPAN VLAN
mirroring will only work when RSPAN Global Settings are enabled. RSPAN redirect function will work when RSPAN is
enabled and at least one RSPAN VLAN has been configured with redirect ports.
To view this window, click
L2 Features > RSPAN Settings
as shown below:
Figure 3 - 22 RSPAN Settings window
Enter the
VLAN Name
or
VID
and click
Create
. To remove an entry click
Delete
, to modify an entry click the
corresponding
Edit
button.
Figure 3 - 23 RSPAN Settings window – Edit
The following fields can be set:
Parameter Description
Source Po rts(e.g.:
1-4)
Select the specified ports you wish to configure by entering the port number in this field. Rx,
Tx, or Both can be selected from the dop down menu.
Redirect Port
Use the dop donw menu to specify the ouptut port for the RSPAN VLAN packets.
Tick to
Add
or
Delete
in the
Source Ports
or
Redirect Ports
and click
Apply
to add or remove the information. To
return to the RSPAN Settings window click
<<Back
.
Summary of Contents for DES-3528 - xStack Switch - Stackable
Page 19: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 18...
Page 214: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 213...
Page 306: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 305...
