Configuring Network Services
Configuring Network Services
1. Open the
Apple menu
.
2. Go to
Control Panels
>
AppleTalk
control panel.
3. Select
Ethernet D-Link Port
from the
Connect via:
list box.
4. Do
not
choose
DFE-528 Ethernet
. If you do not see it, go back to the
beginning of this guide and install the drivers again.
5. When the installation is successful, and you have completed this step, choose
“
Quit”
from the “
File”
menu.
6.
Click “Save”
when prompted to save the new settings.
7. Open the
Apple menu
again.
8. Go to
Control Panels>TCP/IP
control panel.
9. Select
Ethernet D-Link Port
from the
Connect via:
list box.
10. From the
Configure:
list box, choose
“Using DHCP Server”
if you are
automatically assigned a
“Dynamic IP address.”
If you are not automatically
assigned an IP address, choose
“Manual”
for a
“Static IP address.”
11. Choose
“Quit”
from the
“File”
menu.
12.
Click “Save”
when prompted to save the new settings.
Restart your computer one more time.
Your adapter is now ready to network with other computers.
-5-
