DFE-650 Series Fast Ethernet PC Card User's Guide
24
Software Installation
the NetWare SETUP.EXE program is also the installation program
for the DFE-650 software.
Before you can proceed with any of the steps which follow, it will
be necessary for you to have a source for the NetWare client
software. Depending on decisions which have been made by the
NetWare administrator for your LAN, the NetWare client software
may be available from a NetWare server on the LAN, or it may be
necessary for you to install from the Novell NetWare CD-ROM or
diskettes. If you are in doubt as to the proper source for your
NetWare client software, then please consult your NetWare
administrator.
Irrespective which form your source takes, you will need to identify
the directory which holds the NetWare Client32 for DOS software.
If your source for NetWare Client32 for DOS is the NetWare 4.11
CD-ROM, then the appropriate directory will be (assuming that the
CD-ROM drive is E:),
E:\PRODUCTS\DOSWIN32\IBM_6
In Program Manager, choose RUN under the FILE menu, then, in
the RUN dialog box, choose the
Browse
button. Select the drive
which holds the software source, then navigate to the appropriate
directory. Double-click SETUP.EXE to initiate the installation run.
The initial screen in the SETUP.EXE run is only for the purpose of
selecting the language in which the screen instructions which will
appear during the rest of the SETUP.EXE run. Choose the
OK
button for English, or select another one of the languages offered,
and then choose the
OK
button. The NetWare Client 32 Welcome
screen then appears.
NetWare Client 32 Welcome Screen
The Welcome screen provides some orientation information, and
offers you the choice of reading additional technical information in
the README file before going ahead with installation. It might be
