Total: 1700
•
vpn-out
•
Priority 6: VoIP 500 kpbs
•
Priority 0: Best effort
Total: 1700
•
in-pipe
•
Priority 6: VoIP 500 kpbs
Total: 2000
•
out-pipe
•
Priority 6: VoIP 500 kpbs
Total: 2000
The following pipe rules are then needed to force traffic into the correct pipes and precedence
levels:
Rule
Name
Forward
Pipes
Return
Pipes
Src
Int
Source
Network
Dest
Int
Destination
Network
Selected
Service
Prece
dence
vpn_voip_out
vpn-out
out-pipe
vpn-in
in-pipe
lan
lannet
vpn
vpn_remote_net
H323
6
vpn_out
vpn-out
out-pipe
vpn-in
in-pipe
lan
lannet
vpn
vpn_remote_net
All
0
vpn_voip_in
vpn-in
in-pipe
vpn-out
out-pipe
vpn
vpn_remote_net
lan
lannet
H323
6
vpn_in
vpn-in
in-pipe
vpn-out
out-pipe
vpn
vpn_remote_net
lan
lannet
All
0
out
out-pipe
in-pipe
lan
lannet
wan
all-nets
All
0
in
in-pipe
out-pipe
wan
all-nets
lan
lannet
All
0
With this setup, all VPN traffic is limited to 1700 kbps, the total traffic is limited to 2000 kbps and
VoIP to the remote site is guaranteed 500 kbps of capacity before it is forced to best effort.
SAT with Pipes
If SAT is being used, for example with a web server or ftp server, that traffic also needs to be forced
into pipes or it will escape traffic shaping and ruin the planned quality of service. In addition, server
traffic is initiated from the outside so the order of pipes needs to be reversed: the forward pipe is the
in-pipe and the return pipe is the out-pipe.
A simple solution is to put a "catch-all-inbound" rule at the bottom of the pipe rule. However, the
external interface (wan) should be the source interface to avoid putting into pipes traffic that is
coming from the inside and going to the external IP address. This last rule will therefore be:
Rule
Name
Forward
Pipes
Return
Pipes
Source
Interface
Source
Network
Dest
Interface
Dest
Network
Selected
Service
Prece
dence
all-in
in-pipe
out-pipe
wan
all-nets
core
all-nets
All
0
10.1.10. More Pipe Examples
Chapter 10. Traffic Management
470
Summary of Contents for DFL-1600 - Security Appliance
