-process=<OSPF Router Pro-
cess>
Required if there are >1 OSPF router processes.
-route
Show the internal OSPF process routingtable.
-snoop={ON | OFF}
Show troubleshooting messages on the console.
-verbose
Increase amount of information to display.
<interface>
OSPF enabled interface.
<interface>
OSPF enabled interface.
<lsaID>
LSA ID.
<OSPF Area>
OSPF Area.
<OSPF Neighbor>
Neighbor.
{HA | ALT}
Show HA routingtable.
2.2.50. pcapdump
Packet capturing.
Description
Packet capture engine
Usage
pcapdump
Show capture status.
pcapdump -start [<interface(s)>] [-size=<value>] [-snaplen=<value>]
[-count=<value>] [-out] [-out-nocap]
[-eth=<Ethernet Address>] [-ethsrc=<Ethernet Address>]
[-ethdest=<Ethernet Address>] [-ip=<IP4 Address>]
[-ipsrc=<IP4 Address>] [-ipdest=<IP4 Address>]
[-port=<0...65535>] [-srcport=<0...65535>]
[-destport=<0...65535>] [-proto=<0...255>] [-icmp] [-tcp]
[-udp] [-promisc]
Start capture.
pcapdump -stop [<interface(s)>]
Stop capture.
pcapdump -status
Show capture status.
pcapdump -show [<interface(s)>]
Show a captured packets brief.
2.2.50. pcapdump
Chapter 2. Command Reference
58
