Identifying Components
2
The following illustrates the front panel of the DFL-260 and
explains the front panel’s key components:
2.1 Front View
02
1.
Power LED
2.
Status LED
3. WAN LED
4. DMZ LED
5. LAN LED
Power indication of the DFL-260.
System status indication of the DFL-260.
WAN port status indication of the DFL-260.
DMZ port status indication of the DFL-260.
LAN port status indication of the DFL-260.
Note:
WAN interface do not support Auto MDI/MDI-X
(Automatic cable detection for Straight-through and Crossover
function).
1 2
3 4
5
2.2 Rear View
1.
Console Port
2.
LAN Ports
3. DMZ Port
4. WAN Port
5. Reset
6. Power Receptor
Connects to RS-232 console cable that connects to PC.
These are for the connection of Ethernet cables to the internal network.
This is for the connection of an Ethernet cable to an DMZ network.
This is for the connection of an Ethernet cable to a Cable or DSL modem.
This is for resetting system configuration to factory defaults.
This is for the connection of the power adaper to a wall outlet or power strip.
1
3 4
6
2
5
