LAN Settings
The
LAN Settings
allows you to view the current IP address and subnet
mask assigned to the DFL-600. It also allows you to change these settings.
If it is necessary to change the
IP Address
or
Subnet Mask
assigned to the
DFL-600, enter the new values in the appropriate fields, and press
Apply
to
make the changes current.
Note:
if you assign an IP address and subnet mask to the DFL-600 that is
different from the IP address range assigned to the computers connected to
the LAN ports, you will no longer be able to connect to the DFL-600 from
any of these computers. In order to re-establish the connection between a
computer on the LAN side and the DFL-600, you will need to assign at least
one computer on the LAN side an IP address from the same range as the IP
address you assign to the DFL-600. As an alternative, you can configure the
DFL-600’s DHCP server to give IP addresses from the new IP address range
that you will give the DFL-600 here. If you choose this option, you will have
to reboot the PCs on the LAN side of the DFL-600 in order for them to get
their new IP address settings (or you can enter the “C:\>ipconfig /renew”
command in the Command Prompt window, without rebooting your
computer).
