91
Adding a PPTP Client
Step 1.
Select
VPN
>
PPTP
Client.
!
User name:
Specify the PPTP client. This should be unique.
!
Password:
Specify the PPTP client password.
!
Server Address:
Enter the PPTP Server’s IP address.
!
Remote Server:
Single Machine:
Check to connect to single computer.
Multi-Machine:
Check to allow multiple computers connected
to the PPTP server.
IP Address:
Enter the PPTP Client IP address.
Netmask:
Enter the PPTP Client Sub net mask.
!
Auto-Connect when sending packet through
the link:
Check to enable the auto-connection
whenever there’s packet to transmit over the
connection.
!
Auto-Disconnect if idle … minutes:
Configure
this device to disconnect to the PPTP Server
when there is no activity for a predetermined
period of time. To keep the line always connected,
set the number to 0.
!
Schedule:
Click the down arrow to select the
schedule, which was pre-determined in Schedule.
Refer to the corresponding section for details.
Click
OK
to save modifications or click
Cancel
to cancel modifications.