47
Using Web-Based Management
Save Changes window
After the settings have been saved to NV-RAM, they will become the default
settings for the device, and they will be used every time it is powered on, reset
or rebooted. The only exception to this is a factory reset, which will clear all
settings and restore them to the initial values present when the device was
purchased.
Click on the
Save Configuration
button at the bottom of the window to save
the system settings to NV-RAM.
Click on the
Save
button at the bottom right of the window to save the settings.
Use Config File:
Toggle to
Enabled
to use the settings in a configuration
text file when the device is reset (rebooted).
Config File Name:
The complete path and filename on the TFTP server
for the desired configuration file.
Firmware and Configuration Update
Note
:
After finishing the Update Firmware, you must perform a Factory Reset
to make sure the firmware update is complete.