D-Link DGE-530T User Manual
Appendix A - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below.
Step 1:
Windows
®
2000: Click on
Start > Settings > Control Panel > Network Connections
Windows XP: Click on
Start > Control Panel > Network Connections
Windows Vista
™
: Click on
Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
network connections
Step 2:
Right-click on the
Local Area Connection, which represents your D-Link network adapter, and select Properties.
Step 3:
Highlight
Internet Protocol (TCP/IP) and click Properties.
Step 4:
Click
Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between
2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the
LAN IP address of your router (192.168.0.1).
Summary of Contents for DGE-530T
Page 1: ......
