DGS-1024T Unmanaged Gigabit Ethernet Switch User’s Guide
7
3
3
I
DENTIFYING
E
XTERNAL
C
OMPONENTS
This chapter describes the front panel, rear panel, side panels, and LED indicators of the
Switch.
Front Panel
The front panel of the DGS-1024T consists of an LED indicator for power and indicators for
24 individual ports for speed, full duplex, and link/activity.
Figure 3-1. Front panel view of the DGS-1024T
Rear Panel
The rear panel contains the AC power connector and one system fan used to dissipate heat.
The AC power connector is a standard three-pronged connector that supports the power
cord. Plug-in the female connector of the provided power cord into this socket, and the male
side of the cord into a power outlet. Supported input voltages range from 100 ~ 240 VAC at
50 ~ 60 Hz.
Figure 3-2. Rear panel view of the Switch.
Side Panels
Each side panel contains heat vents that are used to dissipate heat. Do not block these
openings, and leave at least 6 inches of space at the rear and sides of the switch for proper
ventilation. Be reminded that without proper heat dissipation and air circulation, system
components might overheat, which could lead to system failure.
Summary of Contents for DGS-1024T - Switch
Page 4: ......