D-Link Switch User Manual
2
Product Introduction
The DGS-1026MP is an unmanaged switch with 24 10/100/1000 Mbps ports and 2 Gigabit combo uplink ports.
The first 24 10/100/1000 Mbps ports of the DGS-1026MP support IEEE 802.3af/at Power over Ethernet (PoE)
and are capable of supplying up to 30 watts of power per port. The DGS-1026MP is easy to install and requires
no configuration. With these features combined, the DGS-1026MP provides an ideal solution for Small and
Medium Business (SMB) users who have limited budgets but require PoE capability in a switch.
Package Contents
Open the shipping carton and carefully unpack the contents. Please consult the packing list to make sure all
items are present and undamaged.
One D-Link DGS-1026MP 26-Port Unmanaged PoE Gigabit Switch
One power cord
One power cord retainer
One rack-mount kit and rubber feet
One Quick Installation Guide
If any item is found missing or damaged, please contact
your local retailer
for replacement.
Product Overview
Front Panel
Figure 1 – DGS-1026MP Front Panel
Item
Description
LED MODE
Press to change the port LEDs to display the PoE status or the link status. The color of
the LED Mode light will indicate which LED status display is currently active. Green LEDs
means the Switch is currently showing the Link/Act/Speed status of the ports, while
amber LEDs display the PoE status of the ports. Please refer to the table in the section
Indicator LEDs
for more detailed information on the LED Mode function.
Ports 1 to 24
These are 10/100/1000 Mbps PoE-capable ports used for connecting Ethernet devices
and PoE-powered devices.
Ports 25 to 26
These are 10/100/1000 Mbps/SFP combo ports. When using one interface of these
combo ports, the other interface in the pair will become unavailable. For example, using
the SFP interface on port 25 will render the RJ45 interface on port 25 unavailable.
Table 1 – Front panel connector description
Rear Panel
Figure 2 – DGS-1026MP Rear Panel
