D-Link Switch User Manual
3
Item
Description
Kensington
Security Lock
The DGS-1026MP adds additional value by providing users with a simple, reliable, built-
in security solution to prevent theft in the form of a Kensington Security Slot on the rear
panel of the Switch.
SWITCH GND
This is used to connect the switch to ground.
Power Cord
Retainer Slot
This is used for securing the power cord retainer to the switch.
DC Power Jack
This is used to connect the power cable to the switch.
Table 2 – Rear panel connector description
Indicator LEDs
Figure 3 – DGS-1026MP Front panel LEDs
LED
Status
Description
PoE Power
Budget
Solid red
(LED above “
300W
”): The total PoE power consumption is between 301
and 370 W.
Solid amber (LED below “
300W
”): The total PoE power consumption is between 201
and 300 W.
Solid green (LED below “
200W
”): The total PoE power consumption is between 101
and 200 W.
Solid green (LED below “
100W
”): The total PoE power consumption is between 1
and 100 W.
Off
There are no PoE-powered devices attached to the Switch.
LED Mode
Solid amber The port LEDs are currently displaying the PoE status. Please refer to
PoE Mode
in this table for more information.
Solid green The port LEDs are currently displaying the port link status. Please refer
to
Link/Act/Speed
in this table for more information.
Power
Solid green The device is powered on.
Solid amber The device is powered off.
Link/Act/Speed
(Ports 1 to 26)
Solid amber There is an active link on the corresponding port at 10/100 Mbps.
Blinking
amber
There is traffic on the corresponding port at 10/100 Mbps.
Solid green There is an active link on the corresponding port at 1000 Mbps.
Blinking
green
There is traffic on the corresponding port at 1000 Mbps.
PoE Mode
(Ports 1 to 24)
Solid amber The power supply on the corresponding port has failed.
Solid green The corresponding port is supplying power correctly.
Table 3 – Front panel LED description
