6 Command
Line Interface
D-Link Web Smart Switch User Manual
96
IP Setting Mode : Static
IP Address : 10.90.90.90
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
DHCPv6 Client State : Disabled
IPv6 Global Unicast Address: 3ffe:501:ffff:100:100::1/64
DGS-1210-52>
show switch
Purpose
To display information about the Switch.
Syntax
s how s witch
Description
The
s how s witch command
displays the status of the switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the switch information:
DGS-1210-52> show switch
System Name :
System Contact :
System Location :
System up time : 0 days, 6 hrs, 32 min, 17 secs
System Time : 02/01/2012 06:32:19
System hardware version : B1
System firmware version : 3.10.006
System boot version : 1.00.005
System Protocol version : 2.001.004
System serial number : 1MB1733K0000A
MAC Address : 00-01-02-03-04-05
DGS-1210-52>
config account admin password
Purpose
To display the configuration of an IP interface on the Switch.
Syntax
config account admin pas s word <pas s wd>
Description
The
config account admin pas s word command
sets the
administrator password.
Parameters
<passwd>
−
The new password of the administrator.
Restrictions
None.
Summary of Contents for DGS-1210-10P
Page 1: ......
Page 32: ...5 Configuration D Link Web Smart Switch User Manual 2 27 7 Figure 5 16 User Guide Micro Site...
Page 109: ......