5 Configuration
D-Link Web Smart Switch User Manual
50
Figure 5.54 – L2 Functions > LLDP > LLDP MED Settings
L2 Functions > LLDP > LLDP Port Settings
The Basic LLDP Port Settings page displays LLDP port information and contains parameters for configuring
LLDP port settings.
Figure 5.55 – L2 Functions > LLDP > LLDP Port Settings
From Port/ To Port:
A consecutive group of ports may be configured starting with the selected port.
Notification State:
Specifies whether notification is sent when an LLDP topology change occurs on the port.
The possible field values are:
Enabled –
Enables LLDP notification on the port.
Disabled –
Disables LLDP notification on the port. This is the default value.
Admin Status:
Specifies the LLDP transmission mode on the port. The possible field values are:
TX_Only –
Enables transmitting LLDP packets only.
RX_Only –
Enables receiving LLDP packets only.
TX_and_RX –
Enables transmitting and receiving LLDP packets. This is the default.
Disabled –
Disables LLDP on the port.
Port Description:
Specifies whether the Port Description TLV is enabled on the port. The possible field
values are:
Enabled –
Enables the Port Description TLV on the port.
Disabled –
Disables the Port Description TLV on the port.
System Name:
Specifies whether the System Name TLV is enabled on the port. The possible field values
are:
Enabled –
Enables the System Name TLV on the port.
Disabled –
Disables the System Name TLV on the port.
System Description:
Specifies whether the System Description TLV is enabled on the port. The possible
field values are:
Enabled –
Enables the System Description TLV on the port.
Disabled –
Disables the System Description TLV on the port.
System Capabilities:
Specifies whether the System Capabilities TLV is enabled on the port. The possible
field values are:
Enabled –
Enables the System Capabilities TLV on the port.
Summary of Contents for DGS-1210-10P
Page 1: ......
Page 32: ...5 Configuration D Link Web Smart Switch User Manual 2 27 7 Figure 5 16 User Guide Micro Site...
Page 109: ......
