6 Command
Line Interface
D-Link Web Smart Switch User Manual
90
Command
Parameter
save
debug info
Each command is listed in detail, as follows:
?
Purpose
To display a list of commands.
Syntax
?
Description
The
?
command displays a list of commands of the switch.
Parameters
None.
Restrictions
None.
Example usage:
To display a list of commands of the switch:
DGS-1210-52> ?
USEREXEC commands :
config account admin password <passwd>
config ipif System { ipaddress <ip-address> <subnet-mask> gateway <gw-
address> | dhcp }
debug info
download { firmware_fromTFTP tftp://ip-address/filename | cfg_fromTFTP
tftp://ip-address/filename }
logout
ping <ip_addr>
reboot
reset config
save
show ipif
show switch
upload { firmware_toTFTP tftp://ip-address/filename | cfg_toTFTP tftp://ip-
address/filename }
DGS-1210-52>
download
Purpose
To download and install a firmware, boot, or switch configuration
file from a TFTP server.
Syntax
download
{ firmware_fromTFTP | cfg_fromTFTP } {<ipaddr> |
<ipv6addr>} <path_filename>
Description
The
download
command downloads a firmware, boot, or switch
configuration file from a TFTP server.
Parameters
firmware_fromTFTP
−
Download and install new firmware on the
Switch from a TFTP server.
Summary of Contents for DGS-1210-10P
Page 1: ......
Page 32: ...5 Configuration D Link Web Smart Switch User Manual 2 27 7 Figure 5 16 User Guide Micro Site...
Page 109: ......
