6 Command
Line Interface
D-Link Web Smart Switch User Manual
94
Description
The
ping
command checks if another IP address is reachable on
the network. You can ping the IP address connected to through
the managed VLAN (VLAN 1 by default), as long as there is a
physical path between the switch and the target IP equipment. By
default, Switch sends five pings to the target IP.
Parameters
<ipaddr>
- The IP address of the host.
Restrictions
None.
Example usage:
To ping the IP address 10.90.90.91:
DGS-1210-52>
ping
10.90.90.91
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
Reply Received From :10.90.90.91, TimeTaken : 20 msecs
--- 10.90.90.91 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DGS-1210-52>
ping6
Purpose
To test the connectivity between network devices.
Syntax
ping6 <ipv6addr>
Description
The
pingv6
command checks if another IP address is reachable
on the network. You can ping the IP address connected to
through the managed VLAN (VLAN 1 by default), as long as
there is a physical path between the switch and the target IP
equipment. By default, Switch sends five pings to the target IP.
Parameters
<ipv6addr>
- The IPv6 address of the host.
Restrictions
None.
Example usage:
To ping the IP address 3000::1:
DGS-1210-52>
ping6
3000 ::1
Reply Received From : 3000 ::1, TimeTaken : 20 msecs
Reply Received From : 3000 ::1, TimeTaken : 20 msecs
Reply Received From : 3000 ::1, TimeTaken : 20 msecs
--- 3000 ::1 Ping Statistics ---
3 Packets Transmitted, 3 Packets Received, 0% Packets Loss
DGS-1210-52>
Summary of Contents for DGS-1210-10P
Page 1: ......
Page 32: ...5 Configuration D Link Web Smart Switch User Manual 2 27 7 Figure 5 16 User Guide Micro Site...
Page 109: ......
