29
MIBs
Management and counter information are stored by the Switch in the
Management Information Base (MIB). The Switch uses the standard MIB-II
Management Information Base module. Consequently, values for MIB objects
can be retrieved from any SNMP-based network management software. In
addition to the standard MIB-II, the Switch also supports its own proprietary
enterprise MIB as an extended Management Information Base. The
proprietary MIB may also be retrieved by specifying the MIB Object Identifier.
MIB values can be either read-only or read-write.
Enabled / Disabled:
To selecting enable or disable SNMP function on the
Switch.
SNMP Community / Trap:
To configure the SNMP Community or SNMP
Trap configuration.
Configure SNMP Community:
Figure 25. SNMP Community Setting
Add Group:
To add a SNMP Community group, press
“Add Group”
button,
the Add SNMP Community configuration window will pop out; fill in the
community name and assign the community enable read_only or read_write.
Press “Apply” button to execute the setting.
Figure 26. Add SNMP Community group
Summary of Contents for DGS-1248T - Switch
Page 40: ...35 Figure 37 Port Statistic...
Page 52: ......
