DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
131
Figure 5-54 LLDP Dot1 TLVs Settings window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Port VLAN
Select this option to enable or disable the port VLAN ID TLV to send.
The Port VLAN ID TLV is an optional fixed length TLV that allows a
VLAN bridge port to advertise the port’s VLAN identifier (PVID) that will
be associated with untagged or priority tagged frames.
Protocol VLAN
Select this option to enable or disable Port and Protocol VLAN ID
(PPVID) TLV to send, and enter the VLAN ID in PPVID TLV.
VLAN Name
Select this option to enable or disable the VLAN name TLV to send,
and enter the ID of the VLAN in the VLAN name TLV.
Protocol Identity
Select this option to enable or disable the Protocol Identity TLV to
send, and the protocol name. Options for protocol name to choose
from are
None
,
EAPOL
,
LACP
,
GVRP
,
STP
, and
All
.
Click the
Apply
button to accept the changes made.
LLDP Dot3 TLVs Settings
This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3
organizational specific TLV data type from outbound LLDP advertisements.
To view the following window, click
L2 Features > LLDP > LLDP Dot3 TLVs Settings
, as show below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
