D-Link DGS-1510 Series Web Ui Reference Manual Download

Page: 244 / 430

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

236

are

Any

Host

, and

IPv6

. When the

Any

option is selected, any source

traffic will be evaluated according to the conditions of this rule. When
the

Host

option is selected, enter the source host’s IPv6 address here.

When the

IPv6

option is selected, the

Prefix Length

option will also be

available. Enter the source IPv6 address and prefix length value in the
spaces provided.

Destination

Select and enter the destination information here. Options to choose
from are

Any

Host

, and

IPv6

. When the

Any

option is selected, any

destination traffic will be evaluated according to the conditions of this
rule. When the

Host

option is selected, enter the destination host’s

IPv6 address here. When the

IPv6

option is selected, the

Prefix

Length

option will also be available. Enter the destination IPv6

address and prefix length value in the spaces provided.

DSCP

Select or enter the DSCP value used here. This value must be
between 0 and 63.

Flow Label

Enter the flow label value here. This value must be between 0 and
1048575.

Time Range

Enter the name of the time range to associate with this ACL rule.

After selecting the

ESP

option as the

Protocol Type

, the following page and parameters will be available,

as shown below:

Figure 8-71 Extended IPv6 ACL (Add Rule) ESP window

The

dynamic

fields that can be configured are described below:

Parameter

Description

Fragments

Select the

Fragments

option to include packet fragment filtering.

Source

Select and enter the source information here. Options to choose from
are

Any

Host

, and

IPv6

. When the

Any

option is selected, any source

traffic will be evaluated according to the conditions of this rule. When
the

Host

option is selected, enter the source host’s IPv6 address here.

When the

IPv6

option is selected, the

Prefix Length

option will also be

available. Enter the source IPv6 address and prefix length value in the
spaces provided.

Summary of Contents for DGS-1510 Series















































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1510 Series

Reviews:

Related manuals for DGS-1510 Series

Brands by name

Popular brands

D-Link DGS-1510 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-1510 Series

Reviews:

Related manuals for DGS-1510 Series

Brands by name

Popular brands