DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
249
DSCP
Select or enter the DSCP value used here. This value must be
between 0 and 63.
TCP Flag
Tick the appropriate TCP flag option to include the flag in this rule.
Options to choose from are
ack
,
fin
,
psh
,
rst
,
syn
, and
urg
.
VID
Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.
CoS
Select the Class of Service (CoS) value here. Options to choose from
are from
0
to
7
.
Time Range
Enter the name of the time range to associate with this ACL rule.
After selecting the
UDP
option as the
Protocol Type
, the following page and parameters will be available,
as shown below:
Figure 8-88 Extended Expert ACL (Add Rule) UDP window
The
dynamic
fields that can be configured are described below:
Parameter
Description
Source IP Address
Select and enter the source information here. Options to choose from
are
Any
,
Host
, and
IP
. When the
Any
option is selected, any source
traffic will be evaluated according to the conditions of this rule. When
the
Host
option is selected, enter the source host’s IP address here.
When the
IP
option is selected, the
Wildcard
option will also be
available. Enter the group of source IP addresses by using a wildcard
bitmap. The bit corresponding to the bit value 1 will be ignored. The bit
corresponding to the bit value 0 will be checked.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
