D-Link DGS-1510 Series Web Ui Reference Manual Download

Page: 260 / 430

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

252

address here. When the

MAC

option is selected, the

Wildcard

option

will also be available. Enter the source MAC address and wildcard
value in the spaces provided.

Destination MAC Address

Select and enter the destination information here. Options to choose
from are

Any

Host

, and

MAC

. When the

Any

option is selected, any

destination traffic will be evaluated according to the conditions of this
rule. When the

Host

option is selected, enter the destination host’s

MAC address here. When the

MAC

option is selected, the

Wildcard

option will also be available. Enter the destination MAC address and
wildcard value in the spaces provided.

Specify ICMP Message Type

Select the ICMP message type used here.

ICMP Message Type

When the ICMP Message Type is not selected in the

Specify ICMP

Message Type

drop-down list, enter the ICMP Message Type

numerical value used here. When the ICMP Message Type is selected
in the

Specify ICMP Message Type

drop-down list, this numerical

value will automatically be entered.

Message Code

When the ICMP Message Type is not selected in the

Specify ICMP

Message Type

drop-down list, enter the Message Code numerical

value used here. When the ICMP Message Type is selected in the

Specify ICMP Message Type

drop-down list, this numerical value will

automatically be entered.

IP Precedence

Select the IP precedence value used here. Options to choose from are

0 (routine)

1 (priority)

2, (immediate)

3 (flash)

4 (flash-override)

5 (critical)

6 (internet)

, and

7 (network)

ToS

After selecting the IP precedence value, select the Type-of-Service
(

ToS

) value that will be used here. Options to choose from are

(normal)

1 (min-monetary-cost)

2 (max-reliability)

4 (max-

throughput)

8 (min-delay)

, and

DSCP

Select or enter the DSCP value used here. This value must be
between 0 and 63.

VID

Enter the VLAN ID that will be associated with this ACL rule here. This
value must be between 1 and 4094.

CoS

Select the Class of Service (CoS) value here. Options to choose from
are from

Time Range

Enter the name of the time range to associate with this ACL rule.

Summary of Contents for DGS-1510 Series















































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1510 Series

Reviews:

Related manuals for DGS-1510 Series

Brands by name

Popular brands

D-Link DGS-1510 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-1510 Series

Reviews:

Related manuals for DGS-1510 Series

Brands by name

Popular brands