DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
307
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
ARP Inspection Log
This window is used to view, configure and clear the ARP inspection log information.
To view the following window, click
Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP
Inspection Log
, as shown below:
Figure 9-47 ARP Inspection Log window
The fields that can be configured are described below:
Parameter
Description
Log Buffer
Enter the log’s buffer value used here. This value must be between 1
and 1024. By default, this value is 32.
Click the
Apply
button to accept the changes made.
Click the
Clear Log
button to clear the log.
IP Source Guard
IP Source Guard Port Settings
This window is used to view and configure the IP source guard port settings.
To view the following window, click
Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Port
Settings
, as shown below:
Figure 9-48 IP Source Guard Port Settings window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the IP source guard’s state for the specified
Summary of Contents for DGS-1510 Series
Page 1: ...1...
