DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
312
Figure 9-53 IPv6 Snooping window
The fields that can be configured for
Station Move Setting
are described below:
Parameter
Description
Station Move
Select the station move options here. Options to choose from are
Permit
and
Deny
.
Click the
Apply
button to accept the changes made.
The fields that can be configured for
IPv6 Snooping Policy Settings
are described below:
Parameter
Description
Policy Name
Enter the IPv6 snooping policy name used here. This name can be up
to 32 characters long.
Limit Address Count
Enter the address count limit value used here. This value must be
between 0 and 511. Tick the
No Limit
option to disable this option.
Protocol
Select the protocol that will be associated with this policy here. Options
to choose from are
Disabled
,
DHCP
,
NDP
, and
All
. DHCPv6
Snooping sniffs the DHCPv6 packets sent between the DHCPv6 client
and server in the address assigning procedure. When a DHCPv6 client
successfully got a valid IPv6 address, DHCPv6 snooping creates its
binding database. ND Snooping is designed for a stateless auto-
configuration assigned IPv6 address and manually configured IPv6
address. Before assigning an IPv6 address, the host must perform
Duplicate Address Detection first. ND snooping detects DAD
messages (DAD NS and DAD NA) to build its binding database. The
NDP packet (NS and NA) is also used to detect whether a host is still
reachable and determine whether to delete a binding or not.
VID List
Enter the VLAN ID list used here.
Click the
Apply
button to accept the changes made.
Click the
Edit
button to re-configure the specific entry.
Click the
Delete
button to remove the specified entry.
IPv6 ND Inspection
This window is used to view and configure the IPv6 ND inspection settings.
To view the following window, click
Security > IMPB > IPv6 > IPv6 ND Inspection
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
