DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
376
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
TFTP Server IP
Enter the TFTP server’s IP address here. When select the
IPv4
option,
enter the IPv4 address of the TFTP server in the space provided.
When the
IPv6
option is selected, enter the IPv6 address of the TFTP
server in the space provided.
Source URL
Enter the source filename and path of the configuration file located on
the switch here. This field can be up to 64 characters long. Select the
running-config
option to back up the running configuration file from
the Switch. Select the
startup-config
option to back up the start-up
configuration file from the Switch.
Destination URL
Enter the destination path and location where the configuration file
should be stored on the TFTP server. This field can be up to 64
characters long.
Click the
Backup
button to initiate the configuration file backup.
Log Backup
Log Backup to HTTP
This window is used to initiate a system log backup to a local PC using HTTP.
To view the following window, click
Tools > Log Backup > Log Backup to HTTP
, as shown below:
Figure 13-10 Log Backup to HTTP window
The fields that can be configured are described below:
Parameter
Description
Log Type
Select the log type that will be backed up to the local PC using HTTP.
When the
System Log
option is selected, the system log will be
backed up. When the
Attack Log
is selected, the attack log will be
backed up.
Click the
Backup
button to initiate the system log backup.
Log Backup to TFTP
This window is used to initiate a system log backup to a TFTP server.
To view the following window, click
Tools > Log Backup > Log Backup to TFTP
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
