DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
386
Auto Surveillance VLAN
Log Description
Severity
Event description: When a new surveillance device is detected on an interface.
Log Message: New surveillance device detected (<interface-id>, MAC: < mac-
address >)
Parameters description:
interface-id: Interface name.
mac-address: Surveillance device MAC address.
Informational
Event description: When an interface which is enabled surveillance VLAN joins the
surveillance VLAN automatically.
Log Message: <interface-id> add into surveillance VLAN <vid >
Parameters description:
interface-id: Interface name.
vid:VLAN ID
Informational
Event description: When an interface leaves the surveillance VLAN and at the
same time, no surveillance device is detected in the aging interval for that
interface, the log message will be sent.
Log Message: <interface-id> remove from surveillance VLAN <vid >
Parameters description:
interface-id: Interface name.
vid:VLAN ID
Informational
BPDU Attack Protection
Log Description
Severity
Event description: Record the event when the BPDU attack happened.
Log Message: <interface-id> enter STP BPDU under protection state (mode:
<mode>)
Parameters description:
interface-id: Interface on which detected STP BPDU attack.
mode: BPDU Protection mode of the interface. Mode can be drop, block,
or shutdown
Informational
Event description: Record the event when the STP BPDU attack recovered.
Log Message: <interface-id> recover from BPDU under protection state.
Parameters description:
interface-id: Interface on which detected STP BPDU attack.
Informational
Configuration/Firmware
Log Description
Severity
Event description: Firmware upgraded successfully.
Log Message: [Unit <unitID>, ]Firmware upgraded by <session> successfully
(Username: <username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>,
File Name: <pathFile>)
Parameters description:
Informational
Summary of Contents for DGS-1510 Series
Page 1: ...1...
