DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
67
NOTE:
If there is a Box ID conflict when the stack is in the discovery phase, the device will
enter a special standalone topology mode. Users can only get device information,
configure Box IDs, save and reboot. All stacking ports will be disabled and an error
message will be produced on the local console port of each device in the stack. Users
must reconfigure Box IDs and reboot the stack.
Figure 4-47 Physical Stacking window
The fields that can be configured for
Physical Stacking
are described below:
Parameter
Description
Stacking Mode
Select this option to enable or disable the stacking mode.
Stack Preempt
Select this option to enable or disable preemption of the master role to
come into play when a unit with a better priority is added to the Switch
later.
Trap State
Select this option to enable or disable sending of stacking related
traps.
Click the
Apply
button to accept the changes made.
The fields that can be configured for
Stack ID
are described below:
Parameter
Description
Current Unit ID
Select the unit ID of the switch in the stack.
New Box ID
Select the new box ID for the switch that is selected in the
Current
Unit ID
. The user may choose any number between 1 and 6 to identify
the switch in the switch stack.
Auto
will automatically assign a box
number to the switch in the switch stack.
Priority
Enter the priority of the switch stacking unit. The range is from 1 to 63.
Click the
Apply
button to accept the changes made.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
