DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
70
3. This version will support switch upload and downloads for firmware, configuration files and log files,
as follows:
a.
Firmware
– The switch now supports MS firmware downloads from a TFTP server.
b.
Configuration Files
– This switch now supports downloading and uploading of configuration files
both to (for configuration restoration) and from (for configuration backup) MS’s, using a TFTP
server.
c.
Log
– The Switch now supports uploading MS log files to a TFTP server.
4. The user may zoom in and zoom out when utilizing the topology window to get a better, more defined
view of the configurations.
Single IP Settings
This window is used to configure the SIM settings. The Switch is set as a Candidate (CaS) as the factory
default configuration and Single IP Management is disabled.
To view the following window, click
Management > Virtual Stacking (SIM) > Single IP Settings
, as
shown below:
Figure 4-48 Single IP Settings window
The fields that can be configured for
SIM State Configure
are described below:
Parameter
Description
SIM State
Select this option to enable or disable the SIM state on the Switch.
Select
Disabled
to render all SIM functions on the Switch inoperable.
Click the
Apply
button to accept the changes made.
The fields that can be configured for
SIM Role Configure
are described below:
Parameter
Description
Role State
Select to change the SIM role of the Switch. Options to choose from
are
Candidate
, and
Commander
.
Candidate
- A Candidate Switch (CaS) is not the member of a SIM
group but is connected to a Commander Switch. This is the default
setting for the SIM role of the Switch.
Commander
– Select to make the Switch a Commander Switch (CS).
The user may join other switches to this Switch, over Ethernet, to be
part of its SIM group. Choosing this option will also enable the Switch
to be configured for SIM.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
