D-Link DGS-1510 Series Web Ui Reference Manual Download

Page: 86 / 430

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide

File

•

Print Setup

- Will view the image to be printed.

•

Print Topology

- Will print the topology map.

•

Preference

- Will set display properties, such as polling interval, and the views to open at SIM

startup.

Group

•

Add to group

- Add a candidate to a group. Clicking this option will reveal the following dialog

box for the user to enter a password for authentication from the Candidate Switch before being
added to the SIM group. Click

to enter the password or

Cancel

to exit the dialog box.

Figure 4-60 Input password window

•

Remove from group

- Remove an MS from the group.

Device

•

Configure

- Will open the Web manager for the specific device.

View

•

Refresh

- Update the views with the latest status.

•

Topology

- Display the Topology view.

Help

•

About

- Will display the SIM information, including the current SIM version.

Figure 4-61 About window

Firmware Upgrade

This window is used to upgrade firmware from the Commander Switch to the Member Switch. Member
Switches will be listed in the table

To view the following window, click

Management > Virtual Stacking (SIM) > Firmware Upgrade

, as

shown below:

Summary of Contents for DGS-1510 Series















































































































































































































































































































































































































































Search results

Summary of Contents for DGS-1510 Series

Reviews:

Related manuals for DGS-1510 Series

Brands by name

Popular brands

D-Link DGS-1510 Series, Web Ui Reference Manual

Search results

Summary of Contents for DGS-1510 Series

Reviews:

Related manuals for DGS-1510 Series

Brands by name

Popular brands