DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
86
Figure 5-6 MAC Notification (MAC Notification Settings) window
The fields that can be configured are described below:
Parameter
Description
MAC Address Notification
Select to enable or disable MAC notification globally on the Switch.
Interval
Enter the time value between notifications. This value must be
between 1 and 2147483647 seconds. By default, this value is 1
second.
History Size
Enter the maximum number of entries listed in the history log used for
notification. This value must be between 0 and 500. By default, this
value is 1.
MAC Notification Trap State
Select this option to enable or disable the MAC notification trap state.
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the range of ports that will be used for this configuration here.
Added Trap
Select this option to enable or disable the added trap for the port(s)
selected.
Removed Trap
Select this option to enable or disable the removed trap for the port(s)
selected.
Click the
Apply
button to accept the changes made for each individual section.
After clicking the
MAC Notification History
tab, the following page will be available.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
