DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
108
Figure 5-31 STP Instance window
Click the
Edit
button to re-configure the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
MSTP Port Information
This window is used to view and configure the MSTP port information settings.
To view the following window, click
L2 Features > Spanning Tree > MSTP Port Information
, as shown
below:
Figure 5-32 MSTP Port Information window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
Port
Select the port number that will be cleared here.
Click the
Clear Detected Protocol
button to clear the detected protocol settings for the port selected.
Click the
Find
button to locate a specific entry based on the information entered.
Click the
Edit
button to re-configure the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Loopback Detection
The Loopback Detection (LBD) function is used to detect the loop created by a specific port. This feature
is used to temporarily shut down a port on the Switch when a CTP (Configuration Testing Protocol)
packet has been looped back to the Switch. When the Switch detects CTP packets received from a port
Summary of Contents for DGS-1510 Series
Page 1: ...1...
