DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
156
Port Trust State and Mutation Binding
This window is used to view and configure port trust state and mutation binding settings.
To view the following window, click
QoS > Advanced Settings > Port Trust State and Mutation
Binding
, as shown below:
Figure 7-8 Port Trust State and Mutation Binding window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
Trust State
Select the port trust state option here. Options to choose from are
CoS
and
DSCP
.
DSCP Mutation Map
Select and enter the DSCP mutation map name used here. This name
can be up to 32 characters long. Select the
None
option to not allocate
a DSCP mutation map to the port(s).
Click the
Apply
button to accept the changes made.
DSCP CoS Mapping
This window is used to view and configure the DSCP CoS mapping settings.
To view the following window, click
QoS > Advanced Settings > DSCP CoS Mapping
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
