DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
157
Figure 7-9 DSCP CoS Mapping window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
CoS
Select the CoS value. Options to choose from are
0
to
7
.
DSCP List
Enter the DSCP list value to map to the CoS value here. This value
must be between 0 and 63.
Click the
Apply
button to accept the changes made.
CoS Color Mapping
This window is used to view and configure the CoS color mapping settings.
To view the following window, click
QoS > Advanced Settings > CoS Color Mapping
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
