DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
159
Figure 7-11 DSCP Color Mapping window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
From Port / To Port
Select the appropriate port range used for the configuration here.
DSCP List
Enter the DSCP list value here that will be mapped to a color. This
value must be between 0 and 63.
Color
Select the color option that will be mapped to the DSCP value. Options
to choose from are
Green
,
Yellow
, and
Red
.
Click the
Apply
button to accept the changes made.
Class Map
This window is used to view and configure the class map settings.
To view the following window, click
QoS > Advanced Settings > Class Map
, as shown below:
Summary of Contents for DGS-1510 Series
Page 1: ...1...
