DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
341
Figure 9-80 CPU Protect Type window
The fields that can be configured for
CPU Protect Type
are described below:
Parameter
Description
Protocol Name
Select the protocol name option here. Options to choose from are
DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6-Other,
IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, and 802.1X.
Rate Limit
Enter the rate limit value used here. This value must be between 0 and
1024 packets per second. Tick the
No Limit
option to disable the rate
limit.
Click the
Apply
button to accept the changes made.
The fields that can be configured for
Protect Type Information
are described below:
Parameter
Description
Protocol Name
Select the protocol name option here. Options to choose from are
DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6-Other,
IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, and 802.1X.
Click the
Find
button to locate a specific entry based on the information entered.
Trusted Host
This window is used to view and configure the trusted host settings.
To view the following window, click
Security > Trusted Host
, as shown below:
Figure 9-81 Trusted Host window
The fields that can be configured are described below:
Parameter
Description
ACL Name
Enter the ACL name used here. This name can be up to 32 characters
long.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
