DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
368
12.
Green
Power Saving
This window is used to configure the power saving settings of the Switch.
To view the following window, click
Green > Power Saving
, as shown below:
Figure 12-1 Power Saving window
The fields that can be configured are described below:
Parameter
Description
Link Detection Power Saving
Select this option to enable or disable the link detection state. When
enabled, a port which has a link down status will be turned off to save
power to the Switch. This will not affect the port’s capabilities when the
port status is link up.
Scheduled Port-shutdown
Power Saving
Select this option to enable or disable applying the power saving by
scheduled port shutdown.
Scheduled Hibernation Power
Saving
Select this option to enable or disable the scheduled hibernation power
saving feature. When this option is enabled, the system will enter into
the hibernation mode based on the specified time range profile
associated with it. When the system enters the hibernation mode, the
switch will go into a low power state and idle. It will shut down all the
ports and LEDs, all network function will be disabled, and only the
console connection will work via the console port. If the Switch is an
endpoint type Power Sourcing Equipment (PSE), the Switch will not
provide power to the port.
Scheduled Dim-LED Power
Saving
Select this option to enable or disable applying the power saving by
scheduled dimming LEDs.
Administrative Dim-LED
Select this option to enable or disable the port LED function.
Type
Select the type of power saving. Options to choose from are
Dim-LED
and
Hibernation
.
Time Range
Enter the name of the time range to associate with the power saving
type.
Summary of Contents for DGS-1510 Series
Page 1: ...1...
