DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
374
To view the following window, click
Tools > Configuration Restore & Backup > Configuration Restore
from HTTP
, as shown below:
Figure 13-6 Configuration Restore from HTTP window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
Source URL
Enter the source filename and path of the configuration file located on
the local PC. This field can be up to 64 characters long. Alternatively
click the
Browse
button to navigate to the location of the configuration
file located on the local PC.
Destination URL
Enter the destination path and location where the configuration file
should be stored on the Switch. This field can be up to 64 characters
long. Select the
running-config
option to restore and overwrite the
running configuration file on the Switch. Select the
startup-config
option to restore and overwrite the start-up configuration file on the
Switch.
Replace
Select this option to replace the current running configuration.
Click the
Restore
button to initiate the configuration restore.
Configuration Restore from TFTP
This window is used to initiate a configuration restore from a TFTP server.
To view the following window, click
Tools > Configuration Restore & Backup > Configuration Restore
from TFTP
, as shown below:
Figure 13-7 Configuration Restore from TFTP window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the switch unit that will be used for this configuration here.
TFTP Server IP
Enter the TFTP server’s IP address here. When select the
IPv4
option,
enter the IPv4 address of the TFTP server in the space provided.
When the
IPv6
option is selected, enter the IPv6 address of the TFTP
Summary of Contents for DGS-1510 Series
Page 1: ...1...
