DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
383
Appendix A - System Log Entries
The following table lists all possible entries and their corresponding meanings that will appear in the
System Log of this switch.
802.1X
Log Description
Severity
Event description: 802.1X Authentication failure.
Log Message: 802.1X authentication fail [due to <reason>] from (Username:
<username>, <interface-id>, MAC: <mac-address>)
Parameters description:
reason: The reason for the failed authentication. The possible reason may
be:
(1) user authentication failure.
(2) no server(s) responding.
(3) no servers configured.
(4) no resources.
(5) user timeout expired.
username: The user that is being authenticated..
interface-id: The switch interface number.
mac-address: The MAC address of the authenticated device.
Critical
Event description:802.1X fails to work due to H/W ACL resource is exhausted.
Log Message: 802.1X cannot work correctly because ACL rule resource is not
available.
Alert
Event description: 802.1X Authentication successful.
Log Message: 802.1X authentication success (Username: <username>,
<interface-id>, MAC: <mac-address>)
Parameters description:
username: The user that is being authenticated.
interface-id: The interface name.
mac-address: The MAC address of the authenticated device.
Informational
AAA
Log Description
Severity
Event description: This log will be generated when AAA global state is enabled or
disabled.
Log Message: AAA is <status>.
Parameters description:
status: The status indicates the AAA enabled or disabled.
Informational
Event description: This log will be generated when login successfully.
Log Message: Successful login through <exec-type> <from client-ip> authenticated
by AAA <aaa-method> <server-ip> (Username: <username>).
Parameters description:
exec-type: It indicates the EXEC types, e.g.: Console, Telnet, SSH, Web,
Web(SSL).
Informational
Summary of Contents for DGS-1510 Series
Page 1: ...1...
