D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
Management Options
The system may be managed out-of-band through the console port on the front panel or in-band using Telnet or a
web browser.
Web-based Management Interface
After you have successfully installed the switch, you can configure the switch, monitor the LED panel, and
display statistics graphically using a web browser, such as Netscape Navigator (version 6.2 and higher) or
Microsoft
®
Internet Explorer (version 5.0).
NOTE:
To access the switch through a web browser, the computer
running the web browser must have IP-based network access to the
switch.
Command Line Console Interface Through the Serial Port or Telnet
You can also connect a computer or terminal to the serial console port or use Telnet to access the switch. The
command-line-driven interface provides complete access to all switch management features. For a full list of
commands, see the
Command Line Reference
, which is included on the documentation CD.
SNMP-Based Management
You can manage the switch with an SNMP-compatible console program. The switch supports SNMP version
1.0, version 2.0, and version 3.0. The SNMP agent decodes the incoming SNMP messages and responds to
requests with MIB objects stored in the database. The SNMP agent updates the MIB objects to generate statistics
and counters.
The switch supports a comprehensive set of MIB extensions:
•
RFC1213 MIB II
•
RFC1493 Bridge
•
RFC1757 RMON
•
RFC 1643 Ether-like MIB
•
D-Link Enterprise MIB
•
802.1p RFC2674
•
RFC 2233 Interface MIB
•
RFC 2933 IGMP MIB
7
