D-Link DGS-3212SR Layer 2 Gigabit Ethernet Switch
State Machine Name
Port Timers state machine
Authenticator PAE state machine
The Authenticator Key Transmit state machine
Reauthentication Timer state machine
Backend Authentication state machine
Controlled Directions state machine
The Key Receive state machine
Conformance to IEEE 802.1X Standards
Configure Authenticator
To display the current
802.1X Authenticator Settings
on the switch, open the
Security
folder, and then the
Port
Access Entity
folder and finally click on the
Configure Authenticator
link. This will open the
802.1X
Authenticator Settings
page, as shown below.
Figure 17-4. 802.1X Authenticator Settings
To configure the 802.1X Authenticator settings for a given port, click on the blue port number under the
Port
heading. This will open the
802.1X Authenticator Settings
page, as shown below.
86
