DGS-3224TGR Gigabit Ethernet Switch User’s Guide
91
Parameter
Description
PVID
PVID is used to decide whether received untagged packets belong to a VLAN.
GVRP
For each corresponding port, GARP VLAN Registration Protocol can be
Enabled
,
Disabled
, or
NoChange
.
Ingress Check
Ingress filtering is used to check if the received port is a member port of the VLAN whose VID
is equal to the VID of incoming packets. The settings include
Enabled
,
Disabled
, and
NoChange
.
Link Aggregation
From the Link Aggregation directory you can access three windows for selecting the Link Aggregation Algorithm,
configuring the Link Aggregation Group, and LACP Port Settings.
Link Aggregation Algorithm
Figure 6- 79. Link Aggregation Algorithm window
The information on the algorithm settings is described as follows:
Parameter
Description
MAC source
Indicates that the switch should examine the MAC source address.
MAC destination
Indicates that the switch should examine the MAC destination address.
MAC source dest
Indicates that the switch should examine the MAC source and destination addresses.
IP source
Indicates that the switch should examine the IP source address.
IP destination
Indicates that the switch should examine the IP destination address.
IP source dest
Indicates that the switch should examine the IP source and destination addresses.
Link Aggregation Group
Link aggregation allows several ports to be grouped together and to act as a single link. This gives a bandwidth that is a
multiple of a single link’s bandwidth.
Link aggregation is most commonly used to link a bandwidth intensive network device or devices – such as a server – to the
backbone of a network.
