DGS-3224TGR Gigabit Ethernet Switch User’s Guide
44
Host IP
Type the IP address of the remote management station that will serve as the SNMP
host for the switch.
SNMP Version
From the pull-down menu select:
V1
– To specifies that SNMP version 1 will be used.
V2c
– To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv
– To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
V3-Auth-NoPriv
– To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv
– To specify that the SNMP version 3 will be used, with an Auth-Priv
security level.
Community String
/SNMPv3 User Name
Type in the community string or SNMP V3 user name as appropriate.
SNMP Group Table
The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous window.
Figure 6- 18. SNMP Group Table window
To delete an existing entry, click the selection button in the right-hand column that corresponds to the port you want to
remove. To create a new entry, click the
New
button, a separate window will appear.
