DGS-3224TGR Gigabit Ethernet Switch User’s Guide
50
Upload Settings to TFTP Server
The switch’s current settings can be uploaded to a TFTP Server by the switch’s management agent.
Figure 6- 26. Upload Settings to TFTP Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware
file for the switch in the Path/Filename field. Click
Upload
to initiate the file transfer.
Please note that if the user does not save configurations to NV-RAM, the configurations the user is uploading to a TFTP
server will not be saved correctly.
Enter the information described below to upload Switch configuration settings to a TFTP server:
Parameter
Description
Server IP Address
The IP address of the TFTP server.
Path/File Name
The full file name (including path) of the setting file on the TFTP server.
Upload History Log to TFTP Server
The switch’s management agent can upload its history log file to a TFTP server.
Please note that an empty history file on the TFTP server must exist on the server before the switch can upload its history
file.
Figure 6- 27. Upload History Log to TFTP Server window
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file name of the firmware
file for the switch in the Path/Filename field. Click
Upload
to initiate the file transfer.
The information is described as follows:
