DGS-3224TGR Gigabit Ethernet Switch User’s Guide
75
The following parameters can be set, for the Ethernet type:
Parameter Description
Profile ID
Type in a unique identifier number for this profile set. This value can be set from
1
to
8
.
Auto Assign
Checking this box instructs the Switch to automatically assign a Profile ID.
Access Profile
Select profile based on Ethernet (MAC Address), IP address or packet content mask.
This will change the window according to the requirements for the type of profile.
Ethernet
instructs the Switch to examine the layer 2 part of each packet header.
Select
IP
to instruct the Switch to examine the IP address in each frame's header.
Select
Packet Content Mask
to specify a mask to hide the content of the packet
header.
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each
packet header and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC
Destination MAC Mask - Enter a MAC address mask for the destination MAC
address.
802.1p
Selecting this option instructs the Switch to examine the 802.1p priority value of each
packet header and use this as the, or part of the criterion for forwarding.
Ethernet Type
Selecting this option instructs the Switch to examine the Ethernet type value in each
frame's header.
Port
The user may set the
Access Profile Mask Setting
window
on a per-port basis by
entering a port number in this field. The port list is specified by listing the beginning
port number on that switch and the highest port number of the range. The beginning
and end of the port list range are separated by a dash. For example, 3-8 specifies all
of the ports between port 3 and port 8
−
in numerical order. Entering
all
will denote all
ports on the Switch.
