DGS-3224TGR Layer 2 Gigabit Ethernet Switch User’s Guide
181
both
Success.
DGS-3224TGR:4#
config 802.1x init
Purpose
Used to initialize the 802.1x functions on a
range of ports.
Syntax
config 802.1x init ports [<portlist>|all]
Description
The config 802.1x init
command is used to
immediately initialize the 802.1x functions
on a range of ports.
Parameters
<portlist>
−
Specifies a range of ports. The
port list is specified by listing the beginning
port number and the highest port number
of the range. The beginning and end of the
port list range are separated by a dash. For
example, 3 would specify port 3. 4 specifies
port 4. 3-4
specifies all of the ports
between port 3 and port 4
−
in numerical
order.
all
−
Specifies all of the ports on the switch.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To initialize 802.1x port-based functions on ports 1 to
15:
