DGS-3224TGR Layer 2 Gigabit Ethernet Switch User’s Guide
51
Command Parameters
show snmp view
{<view_name 32>}
show snmp
community
{<community_string 33>}
show snmp host
{ipaddr>}
show snmp traps
create
trusted_host
<ipaddr>
delete
trusted_host
<ipaddr>
config snmp
system_name
<sw_name>
config snmp
system_location
<sw_location>
Each command is listed, in detail, in the following sections.
create snmp community
Purpose
Used to create an SNMP community string.
Syntax
create snmp community
<community_string 33> view
<view_name> [read_only|read_write]
Description
This command is used to create an SNMP
community string and to specify the string
as enabling read only or read-write
privileges for the SNMP management host.
Parameters
<community_string 33>
−
An alphanumeric
string of up to 33 characters used to
authentication of users wanting access to
