DGS-3224TGR Layer 2 Gigabit Ethernet Switch User’s Guide
72
Example Usage:
To display the packets analysis for port 7:
DGS-3224TGR:4# show packet port 7
Port number : 7
Frame Size Frame Counts Frames|sec Frame Type Total
Total|sec
------------ ------------ ---------- ---------- ------- ---------
64 3275 10 RX Bytes 408973 1657
65-127 755 10 RX Frames 4395 19
128-255 316 1
256-511 145 0 TX Bytes 7918 178
512-1023 15 0 TX Frames 111 2
1024-1518 0 0
Unicast RX 152 1
Multicast RX 557 2
Broadcast RX 3686 16
Broadcast RX 4495 42
show error ports
Purpose
Used to display the error statistics for a
range of ports.
Syntax
show error ports <portlist>
Description
This command will display all of the packet
error statistics collected and logged by the
swtich for a given port list.
Parameters
<portlist>
−
Specifies a range of ports to
be configured. The port list is specified by
listing the beginning port number and the
