DGS-3312SR Gigabit Layer 3 Switch
Figure 8- 11. Tx Packets Analysis (table for Bytes & Packets) window
Select the desired Switch using the
Unit
drop-down menu and the desired port using the
Port
drop-down menu. The
Time
Interval
field sets the interval at which the error statistics are updated.
The following fields can be set or are displayed:
Parameter
Description
Unit
Allows you to specify a Switch in a Switch stack using that Switch’s Unit ID. The
number 15 indicates a Switch in standalone mode.
Port
Allows you to specify a port to monitor
−
from the Switch selected above.
Clear
Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart
Clicking this button instructs the Switch to display a line graph rather than a table.
Bytes
Counts the number of bytes successfully sent from the port.
Packets
Counts the number of packets successfully sent on the port.
Time Interval
<
1s
>
The time between updates received from the Switch, in seconds. The default is
1s
.
Record Number
<
200
>
Select number of times the Switch will be polled between
20
and
200
. The default
value is
200.
Show/Hide
Check whether to display Bytes and Packets.
174
Summary of Contents for DGS-3312SR
