DGS-3312SR Gigabit Layer 3 Switch
Parameter
Description
Unit
Allows you to specify a Switch in a Switch stack using that Switch’s Unit ID. The
number 15 indicates a Switch in standalone mode.
From/To
A consecutive group of ports may be configured starting with the selected port.
Admin State
This pull-down menu allows you to enable or disable Port Security (locked MAC
address table for the selected ports.)
Max.Addr(0-10)
The number of MAC addresses that will be in the MAC address forwarding table for
the selected Switch and group of ports.
Lock Address Mode
This pull-down menu allows you to select how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are
Permanent
,
DeleteOnReset
, and
DeleteOnTimeout
.
SNTP Setting
The Simple Network Time Protocol (SNTP) (an adaptation of the Network Time Protocol (NPT)) is configured on the
Switch using the following windows.
Time Setting
Figure 4- 46. Current Time: Status window
The following parameters can set or are displayed:
Parameter
Description
Current Time
Displays the current system time.
78
Summary of Contents for DGS-3312SR
